Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

[LG Air Conditioner ThinQ][How to Install] Where should I plug the smart/Wi-Fi module into?

Troubleshooting

In case of some products, you can purchase a separately sold Wi-FI module and install it on your own to use the LG ThinQ function
You can purchase a smart/Wi-Fi module at the nearby service center or go to [Parts & Accessories] on the LG Electronics website to purchase it.

※ The relevant function may applied differently on different products.
Accurate product function information can be checked through the product model name, and detailed consultation is available through an LG Electronics Customer Center.

Try this

Floor standing product

➔ A- Type

1. Before inserting the Wi-Fi module, terminate the system and unplug the power cord to block power supplies.

2. After separating the front mid cover from the magnet by pulling it forward, separate the clip connected to the right cover.

3. Find a connector to be inserted into the Wi-Fi module little below.

4. Insert the Wi-Fi module in such a way that the LG log is facing the top. (Insert it in such a way that the LG logo is facing upward.)

5. Close the cover at the middle of the front.

How to disassemble the middle cover of a dual air conditioner

➔ B- Type

1. Before inserting the Wi-Fi module, terminate the system and unplug the power cord to block power supplies.

2. Pull the both sides of the top of the door at the front bottom to separate it.

3. Find a connector to be inserted into the Wi-Fi module.
In some cases, a testing purpose USB might be inserted into the connector.

4. After removing the USB for testing, insert the Wi-Fi module in such a way that the LG logo is facing the left side.

5. Close the door at the front bottom.

Open the air conditioner bottom cover, remove the inspection USB, and install the Wi-Fi module
Open the air conditioner bottom cover, remove the inspection USB, and install the Wi-Fi module

➔ C- Type

1. Before inserting the Wi-Fi module, terminate the system and unplug the power cord to block power supplies.

2. Pull the both sides of the top of the door at the front bottom to separate it.

3. Find a connector to be inserted into the Wi-Fi module.
In some cases, a testing purpose USB might be inserted into the connector.

4. After removing the USB for testing, insert the Wi-Fi module in such a way that the LG logo is facing the left side.

5. Close the door at the front bottom.

Open the air conditioner bottom cover, remove the inspection USB, and install the Wi-Fi module
Open the air conditioner bottom cover, remove the inspection USB, and install the Wi-Fi module
Open the air conditioner bottom cover, remove the inspection USB, and install the Wi-Fi module

Combined (master bedroom) wall mounted type

➔ There is no model applicable or for separately sold Wi-Fi modules.

Move left or right to check the contents.

This guide was created for all models, so the images or content may be different from your product.

*Required question