At a Glance
If your dishwasher is not cleaning properly, this can be caused by a dirty filter, improperly loaded dishes, or a dirty interior from food residue.
Try This
-
Ensure dishes are loaded properly.
1 Avoid loading dishes so that they are overlapping.
2 Ensure dishes do not come in contact with the nozzles.
Adjust the height of the racks when loading dishes, or reload dishes that the nozzles may contact.3 For the best washing performance, load the cutlery in a standing position.
-
Clean the filter.
1 Pull out the lower basket and remove the filter.
In some products you will need to turn the filter counterclockwise and gently pull up to remove.2 Remove any collected debris and wash the filter in running water.
3 Reinstall the filter in the reverse order of disassembling.
Improper installation prevents the filter from collecting debris, and will affect wash performance. -
Perform a Machine Clean Cycle.
1 Remove any dishes from the dishwasher to clean the tub
2 Fill up the detergent dispenser with citric acid, or the dishwasher cleaner of your choosing, slide the detergent lid closed until it clicks.
3 Press the [POWER] button and press and hold [HEAVY] for three seconds to activate the Machine Clean cycle.
4 Press [START] and close the door. The cycle will then begin.
If the problem continues, service will be required. Request a repair with our 24/7 Chat Support
