LG Dishwasher - Spray Arm Maintenance

• This video applies to the following product numbers:

• LDF8072ST

• LDF7561ST

• LDF7561BB

• LDF7561WW

• LDF7551ST

• LDF7551BB

• LDF7551WW




• Welcome to the LG customer support channel.

• In this video we will show you how to properly clean and care for the spray arms in your newly enhanced fully integrated LG dishwasher.

• For optimal results, it is important to periodically check and care for the spray arms to make sure that the water jet holes are not blocked by food particles.

• When cleaning is necessary, remove the appropriate spray arm to clean.

• There are 3 spray arms located inside of your LG dishwasher.

• The lower spray arm is located under the lower rack

• The upper spray arm is located under the upper rack

• The top spray arm is located above the cutlery back




• To remove the lower spray arm, move the lower rack forward.

• Place your hands on the spray arm and pull up.

• The spray arm will detach.




• To remove the upper spray arm, pull the upper rack forward.

• Turn the nut located above the spray arm under the rack counterclockwise and pull down.

• The spray arm will detach.

  
  

• To remove the top spray arm, start by removing the cutlery rack.

• Use a screwdriver to release the retainer clip from the bracket.

• There is a clip on each side of the bracket.

• You can proceed to pull the spray arm out.

• Make sure to not lose the pin that is attached to the spray arm.




• If there is food lodged in the nozzles of the spray arm, take a toothpick or a small pointy object and dislodge it by breaking it up into pieces.

• Tap the spray arm gently on a flat surface to get all of the pieces out.

• By pouring water through the spray arm you can double check to make sure that all particles have been dislodged from the nozzles.




• To reinstall the lower spray arm, place the spray arm directly over the insert and push down until it clips into place.

• Make sure that the spray arm is able to turn freely.

• To reinstall the upper spray arm, press it into place and turn the nut clockwise until it locks into place.

• To reinstall the top spray arm, take the spray arm and the pin and push it back into place.

• Make sure that the retainer clip engages,To see more videos about this product visit us at our Youtube page or at our website LG.com.