If there are foreign objects clogging the drain filter, water may not drain.
Try this
Clean out the drain filter
How to clean the drain filter
Check if the faucet is turned on.
Make sure that the cold and hot water hoses are connected properly and that the water hoses are not kinked.
If the faucet is open and the water hose is installed correctly, take out the drain filter and clean it thoroughly.
Before opening the pump cap, check beforehand to see if there is hot water inside the washer tub.
Hot water from the washer can cause burn injuries.
Be cautious if the floor is a hardwood floor.
➔ If it is okay for water to spill onto the floor
1. When you open the machine's front cover on the lower left, there will be a large stopper and a residual water hose. (Some models have it on the right side of the service cover)
2. Turn the large stopper to the left to open and remove any water and foreign objects.
It is not necessary to pull out the residual water hose.
3. Reassemble the filter after cleaning it. (Make sure to close the large stopper completely to avoid leaks.)
4. Close the service cover.
➔ If it is not okay for water to spill onto the floor
1. When you open the machine's front cover on the lower left, there will be a large stopper and a residual water hose. (Some models have it on the right side of the service cover)
2. Make sure you have a mop or container to keep the floor dry.
3. Grab the residual water hose and pull it out to open the cap, then remove the hose cap and drain the water.
Drain any residual water into the prepared container.
Hold the hose steady, when the cap is opened.
4. Turn the large cap to the left to disassemble it, and then clean the filter.
5. Clean the filter with running water to remove any foreign objects, and then reassemble the filter.
6. . When water is no longer coming out, close the cap and plug it back into place.
(Make sure to close the large stopper completely to avoid leaks. Also, make sure to put the waterproof hose cap on it as well.)
7. Close the service cover.
This guide was created for all models, so the images or content may be different from your product.
