Overheating protection burner
This is a burner with an enhanced safety function that detects the temperature on the bottom of the pot and shuts off the gas before the pot burns.
The safety function is added to this burner in addition to the general gas safety shut-off device.
This is not a function to prevent food from burning, so do not go out or leave it when it is on.
If the overheating protection sensor is activated, use it again only after the sensor has cooled or use another burner.
Try this
If the pot is overheated and the burner turns off with a beep sound (beep beep beep 3 times), it may not be re-ignited right away.
Re-ignite after the product has been cooled sufficiently.
The overheating prevention burner may automatically turn off when cooking food without water or when the burner is burning without a pot in place, During cooking, while lifting or moving the pot, the bottom of the pot does not touch the overheating prevention sensor, so the burner may turn off automatically due to a failure to detect overheating or pot temperature.
If the overheating protection sensor is wet or is affected by a foreign object, it may malfunction. So, wipe the bottom of the pot dry before using it, and do not spray water onto the sensor when cleaning.
A pot with a long handle on one side (one-handled pot) may tip over to one side if placed on a trivet, so make sure to hold the handle while cooking.
Use the recommended amount of oil and use an appropriate container for the size of the burner.
Use cooking containers with flat bottoms and keep the sensor clean at all times.
As the one-handled pot may tip over on its side, hold the handle when using it.
This guide was created for all models, so the images or content may be different from your product.
