Try this
If there is a button type(Electronic] remote controller,
1. Press the mode button to select the fan mode.
2. Press the wind volume button to set the wind volume. [F1 Weak → F2 Mid → F3 Strong]
3. In fan mode, general fan wind is used with no coldness.
※ Some of models don’t have a vent lever, so make sure to ventilate the air frequently during use.
Lever type(mechanical type)
1. Set the time adjustment lever to [Target Time] or [Continuous].
2. Set the wind volume switch to weak or strong.
3. Turn the indoor temperature adjustment lever as close to weak cooling as possible.
※ Lever type [Mechanical] mode has no fan mode but instead, in basic cooling, you can set the indoor temperature elver to weak cooling.
Since the lever type [Mechanical] model has no fan mode, it feels less cold in the early phase, but very soon, general fan wind will be out.
If the indoor temperature is above 30℃(86℉), cooling operation might start.
※ Some of models don’t have a vent lever, so make sure to ventilate the air frequently during use.
This guide was created for all models, so the images or content may be different from your product.
