Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help library

Find helpful information about your LG product

[LG Air Conditioner Installation] [Portable] I want to know how to install the product. (Product released in 2020)

Troubleshooting

Customer should install the portable air cleaner by himself/herself.

Try this.

1. Getting ready tools for installation to use

Phillips driver, tape measure, knife (The tools for installation are not included in the product package.)

2. Measuring the length of the inside of the window, and assembling the installation stand

Measure the length of the window, and refer to the user’s manual to assemble the installation stand in the specified length.

Installation Panel Assembly Specifications and Example Images
ⓐ Standard installation stand (90 cm)(35.43in) ⓑ Extended installation stand (65 cm)(25.59in) ⓒ Extended installation stand (110 cm)(43.30in) Example of assembled installation stand
Installation stand ⓐ Standard installation stand (90 cm) (35.43in) ⓑ Extended installation stand (65 cm) (25.59in) ⓒ Extended installation stand (110 cm) (43.30in) Example of assembled installation stand
Height of the window chassis
90cm (35.43in)~153cm (60.23in) (standard option) ⓐⓑ
153cm (60.23in) to 198cm (77.95in) ⓐⓒ
198cm (77.95in) to 261cm (102.75in) ⓑⓐⓒ

3.Installing the product on the window

Measure the inside length of the window, and assemble the installation stand as shown on the table above.
Go to the opposite side of the window to block the window for preventing materials from falling down out of the window.

Open the window, and insert 20mm (0.78in) insulation on the bottom of the window.
Fix the standard installation stand on the groove of the second window from the front.

Installing insulation, Installing it on the bottom of the installation stand

Slightly turn the fastening screw on the connection of the top of the installation stand counterclockwise to loosen the screw,
push up extended installation stand A to engage it on the window frame,
and fasten the stand by turning the fastening screw clockwise.

Loosening fastening screw, Adjusting height of installation stand
Installing the top of installation stand, Holding fastening screw

Insert the insulation on the both sides of the installation stand.

Installing insulation on the sides

Attach the insulation for adhesion on the joint of the hose.

Close the window, and join the hose.
Assemble the insulation from the top to the bottom until click sounds.

Attaching insulation for adhesion, Hose joint direction

Secure the window with the bracket for window fastening.
The window not secured can be opened from the outside.

Bracket for window securing, Window securing device(Optional)

Insert the insulation in the gap between the rear window and the front window.

Insert the insulation in the gap between the rear window and the front window

Keep the hose length minimal from the window.
Slightly lift the hose to prevent inflow of rainfall.

[How to extend the hose adequate for cooling capabilities] * The hose of more kinks and longer extension degrades cooling capabilities. [How to extend the hose adequate for rainy weather and rainfall] * Protect the hose from rainfall inflow into the product. At least 40 cm(15.74in) [Correct installation location] * There should be no obstacles within 20cm(7.87in) around the product, and the hose outlet vent should be at the height of minimum 40cm(15.74in) from the ground.

This guide was created for all models, so the images or content may be different from your product.

*Required question