Help Library

Topic

  • Document Contents
    Repair
    LG Air Conditioner - for Cooling Check the target temperature when it is not cold enough
    [https://lg.com/support]------------------------Causes and Symptoms------------------- * Since the target temperature is set high, there is no cold wind coming out.If the target temperature is set high, then the outdoor unit will not operat...
  • Document Contents
    Troubleshooting
    LG Air Conditioner - Automatic Defrosting with an Outdoor Unit
    Automatic Defrosting with an Outdoor Unit Symptom - No warm air but gas fumes from an outdoor unit during heating. Cause 1. Frost builds up on an heat exchanger in an outdoor unit if outdoortemperature is low and humidity is high. 2. Frost ...
  • Document Contents
    Troubleshooting
    LG Air Conditioner - Error Codes
    An error code on the display of the room air conditioner can usually be resolvedby performing a few simple troubleshooting steps. If you need information abouta split unit or duct free air conditioner, they are considered business units,ple...
  • Document Contents
    Troubleshooting
    LG Air conditioner - No warm air during heating (Preheat)
    [https://lg.com/support]No warm air during heating (Preheat) Check Point 1. Indoor unit does not blow warm air when heating starts. 2. The product is preparing for heating. Indoor fan will not run until the unit reaches a certain temperatur...
  • Document Contents
    Troubleshooting
    LG Air Conditioner - Error Code [Portable] Check code CH04 (FL)
    [https://lg.com/support]Check code CH04 (FL) [Portable Air Conditioner]➔ Level sensor error.CH04 (FL) is a full level error of the portable air conditioner.Condensed water is naturally evaporated under normal condition however, quantitycond...
  • Document Contents
    Troubleshooting
    LG Split AC - Timer Function
    [https://lg.com/support]Check how to set the on/off the Timer in LG Split Air Conditioner.Timer Function/Feature is used to automatically Turn on and Turn Off the AC forspecific time.Timer Function could be very useful for saving the Electr...
See more