The water temperature during rinsing varies depending on the water temperature you selected.
Select the cycle and the water temperature.
When warm water or both warm water and cold water (warm and cold water) are selected, the temperature of the water supplied will not be a particular temperature (e.g., -30°C), but depend on the warm water settings on your boiler.
For a top load washing machine, the water temperature is not adjusted to a particular temperature with the water from the boiler supplied to the machine as is, so the temperature of water used may vary depending on the settings on the boiler you are using.
However, the steam models heat the water to a particular temperature using a heater under the tub, if you select the “Sanitary cycle 40°C” or the “Sterilize 60°C” cycle.
Rest assured as it is not a product defect, but a temporary phenomenon caused by the seasonal environmental influence.
Try this
I only selected cold water.
- During washing: Cold water is supplied.
- During rinsing: Cold water is supplied.
I only selected warm water.
- During washing: Warm water is supplied.
- During rinsing: Both warm water and cold water are supplied.
I selected both warm water and cold water. I selected warm and cold water, or lukewarm water.
- During washing: Both warm water and cold water are supplied.
- During rinsing: Both warm water and cold water are supplied.
※ If both warm water and cold water are supplied, cold water will be supplied at the start and then warm water will be supplied afterwards in order to prevent damage to the fabric.
This guide was created for all models, so the images or content may be different from your product.
