Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

[LG air conditioner cleaning] I’m curious about how to maintain the air purification filter

Troubleshooting

Try this

Photocatalytic (deodorization) filter

Dry it in low sunlight or fluorescent light for approximately 3 hours.
It is recommended to clean it once every 6 months.
※ based on usage of 8 hours a day

Warning!

Never clean it with water.

Super ultra-fine dust filter

Soak the super ultra-fine dust filter in water enough to submerge it and shake it several times to clean it.
If it is severely contaminated, soak it in tepid water with a neutral detergent for 30 minutes, and then rinse it thoroughly with clean water.
After cleaning, dry it in the shade for one day.
It is recommended to clean it once every 6 months.
※ based on usage of 8 hours a day

Warning!

Drying with a high-temperature heating device, such as a dryer or heater, may cause damage to the filter and deformation.

How to separate the rectangular (1Way) model filter

1. Pull the handle at the back of the stamping on both sides of the panel to open the front grille, and then remove the basic dust filter by pressing the two hooks.

Check the engraving on both sides of the front panel

2. Separate the super ultra-fine dust filter by holding the handle in the filter case holder and pulling it in the direction of the arrow.

Remove the ultra-fine dust filter by holding the handle on the filter case holder and pulling it in the direction of the arrow.
Warning!

Do not separate the filter case holder and the suction grille.

3. Separate the photocatalytic (deodorization) filter by pulling the handle as shown in the figure.

Remove the photocatalyst deodorization filter by pulling the handle.

How to separate the square (4Way) model filter

1. Press the fixing hooks on both sides and open the front grille.

Open the front grill by pressing the retaining hooks on both sides

2. Separate the super ultra-fine dust filter by pressing the fixing hooks.

Warning!

Do not separate the filter holder and the front grille.

Remove the ultra-fine dust filter by pressing the fixing ring

3. Separate the photocatalytic (deodorization) filter at the back of the separated super ultra-fine dust filter by pulling it up.

Remove the photocatalyst deodorizing filter behind the separated ultrafine dust filter by pulling it upward.

How to separate the circular model filter

1. Press the fixing hooks on both sides and open the front grille.

Open the front grill by pressing the retaining hooks on both sides

2. Separate the super ultra-fine dust filter by pressing the fixing hooks.

Remove the ultra-fine dust filter by pressing the fixing ring
Warning!

Do not separate the filter holder and the front grille.

3. Separate the photocatalytic (deodorization) filter at the back of the separated super ultra-fine dust filter by pulling it up.

Remove the photocatalyst deodorizing filter behind the separated ultrafine dust filter by pulling it upward.

This guide was created for all models, so the images or content may be different from your product.

*Required question