Do you want to directly drain water from the dryer instead of using a water container?
When you use a [drying] cycle, condensed water from wet laundry will be collected in the water container.
If you don’t want to use the water container then connect a drain hose to the dryer so that water can be drained to the outside through the drain hole.
If the location of the dryer makes it difficult to connect a drain hose, use a water container instead.
Try this
Connecting a drain hose to the dryer to drain water to the outside.
➔ Disconnect the water container hose connected to the connector and connect a water drain hose.
Connecting a water drain hose(8/9kg) |
---|
Unplug the water container hose ▶ Remove the rubber cap from the bottom of the connector ▶ Insert the cap into the top hole of the connector ▶ Connect the drain hose |
Adjust the length and direction of the water drain hose so that water can be drained through the drain hole.
Also, make sure that the height from the dryer’s base to the drain hole is no greater than 1m.
The drain hose should gently fall inside the drain hole. The drain hole should be located in a place with hard, even flooring.
Since the length of one drain hose is 2.1 meters long, you might need extra extension hoses depending on the installation environment.
If the [Water Drain] error message does not appear, then it means that the water drain hose is connected well.
When pulling out the rubber cap from the bottom of the connector, be careful not to separate the connector itself.
If you grab and turn the connector, the hose inside the dryer can get twisted and cause a malfunction.
Connecting a water drain hose(14/16/17kg) |
---|
Unplug the water container hose ▶ Remove the rubber cap from the bottom of the connector ▶ Insert the cap into the top hole of the connector ▶ Connect the drain hose |
Adjust the length and direction of the water drain hose so that water can be drained through the drain hole.
Connecting a water drain hose(20kg) |
---|
Unplug the water container hose ▶ Remove the rubber cap from the bottom of the connector ▶ Insert the cap into the top hole of the connector ▶ Connect the drain hose |
Adjust the length and direction of the water drain hose so that water can be drained through the drain hole.
This guide was created for all models, so the images or content may be different from your product.