Parece que JavaScript está deshabilitado en su navegador. Habilite JavaScript para asegurarse de aprovechar al máximo el sitio, los productos y los servicios de LG.

Skip to Contents Skip to Accessibility Help

BH16NS40

Ayuda

Operación
¿Cómo activar la función DEMO en Equipos One Body o Minicomponentes?

* [#tabBody1]La función DEMO (presente en algunos modelos de Equipos One Body yMinicomponentes) permite realizar la demostración automática de una música sinla necesidad de conectar un dispositivo externo a la unidad. También permiteactiva...
Problemas
conexión de red inestable

Conexión de red inestable Cosas a verificarMal ambiente de red Como solucionar① Compruebe la ubicación y el estado del enrutador AP. -Coloque el producto cerca o en el mismo espacio con el router.②barra de señal WI-FI debilita → Si hay 5 ba...
Operación
¿Cuánto tiempo puedo grabar vídeo?

¿Cuánto tiempo puedo grabar vídeo?Síntoma¿Cuánto tiempo puedo grabar vídeo? Como solucionarModo de grabación ▶ (4,7 GB con base): HQ / XP (Alta Calidad: 1 hora), SQ / SP (Calidad Estándar: 2 horas),LQ / LP (Low Quality: 4 horas), EQ / EP (E...
Problemas
La grabación programada no funciona

La grabación programada no funcionaSíntomaLa grabación programada no funcionaComo solucionarSi la antena está conectada a la parte posterior del producto, usted no serácapaz de grabar.Inténtelo después de conectar la antena ..Después de con...
Problemas
El exceso de ruido de DISCO

El exceso de ruido de DISCOSíntomaEl exceso de ruido de DISCOCausaSi el disco está doblado o tiene muchos arañazos, puede haber ruido.Si hay ruido de otros discos y si te molesta, no dude en ponerse en contacto conel centro de servicio para...

Ver Más

Manuales y Documentos

Encuentra manuales y documentos

Manual'de Usuario

English

04/12/2013 789K

Encuentra manuales y documentos

Software y controladores

Encuentre software y controladores

New firmware(1.05)for BH16NS40 (SVC Code : NS50)

FW2_BH16NS40_SVC_code_NS50.zip

12/01/2022 4,456K
Referencia

Referencia

Critical Instructions&How to update the firmware
1. Warnings and Notifications

- Do not open any programs or start any system functions during the update,

as they will interfere with data transfer and damage the drive.

Do not cancel the operation once it has been started or the drive will

become permanently damaged, as a result.

- If firmware is not istalled properly as guided below, your drive will be damaged permanently,

and LG will not be responsible for it.

- Could please check model number which you have.

If your driver is not the BH16NS40, the firmware is not updated.

- This is the firmware for SVC Code NS50.

Could please check whehter SVC Code on Main Label is NS50 or not.

If SVC Code of BH16NS40 which you have in not NS50,the firmware is not updated.

- The drives must be original LG branded drives with BD-Writer model number

BH16NS40(no OEM units).

- If you have an OEM unit, branded with another manufacturers name,

Please contact that manufacturer for support and firmware updates.

- This firmware update is for use only on PC’s with Windows 10, 8/8.1, 7.

2.Improvement Point

◆ Model : BH16NS40(SVC Code : NS50)

◆ Version : 1.05

◆ Improvement Point : Improved BD disc compatibility

3.How to update the firmware

1) This is the firmware for SVC Code NS50.

Could please check whehter SVC Code on Main Label is NS50 or not.

2)Download and unzip the file BH16NS40_SVC code NS50.ZIP to a folder of your choice.

3)Close all other programs including: screen saver, antivirus and/or power-down programs.

(If these programs are not closed, they will try to engage the PC,

during the update process, thus interrupting the update and damaging the drive).

4)Check the drive to ensure that there is no disk in the tray before you start

the update procedure.

5)Go into the folder with the update file and double click the BH16NS40_SVC code NS50.exe

program and click the “update” button (red). Once the update is complete,

you will see “Firmware Update Complete” and the button will become green

and advise you to reboot the system. You will need to reboot your PC.
New firmware(N1.03) for BH16NS40 (SVC Code : NS50)

BH16NS40_SVC_Code_NS50_firmware_update_guide.txt

13/02/2018 2K
Referencia

Referencia

the firmware update guide
1. Warnings and Notifications

- Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.

- If firmware is not istalled properly as guided below, your drive will be damaged permanently,
and LG will not be responsible for it.

- Could please check model number which you have.
If your driver is not the BH16NS40, the firmware is not updated.

- This is the firmware for SVC Code NS50.
Could please check whehter SVC Code on Main Label is NS50 or not.
If SVC Code of BH16NS40 which you have in not NS50,the firmware is not updated.

- The drives must be original LG branded drives with BD-Writer model number
BH16NS40(no OEM units).

- If you have an OEM unit, branded with another manufacturers name,
Please contact that manufacturer for support and firmware updates.

- This firmware update is for use only on PC’s with Windows 10, 8/8.1, 7.

2.Improvement Point

◆ Model : BH16NS40
◆ Version : N1.03
◆ Improvement Point : Improved BD disc compatibility

3.How to update the firmware

1) This is the firmware for SVC Code NS50.
Could please check whehter SVC Code on Main Label is NS50 or not.
If SVC Code of BH16NS40 which you have is not NS50,the firmware is not updated.

2)Download and unzip the file BH16NS40_SVC code NS50.ZIP to a folder of your choice.

3)Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).

4)Check the drive to ensure that there is no disk in the tray before you start
the update procedure.

5)Go into the folder with the update file and double click the BH16NS40_SVC code NS50.exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.
New firmware(N1.03) for BH16NS40 (SVC Code : NS50)

BH16NS40_SVC_Code_NS50.zip

13/02/2018 2,513K
Referencia

Referencia

the firmware update guide
1. Warnings and Notifications

- Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.

- If firmware is not istalled properly as guided below, your drive will be damaged permanently,
and LG will not be responsible for it.

- Could please check model number which you have.
If your driver is not the BH16NS40, the firmware is not updated.

- This is the firmware for SVC Code NS50.
Could please check whehter SVC Code on Main Label is NS50 or not.
If SVC Code of BH16NS40 which you have in not NS50,the firmware is not updated.

- The drives must be original LG branded drives with BD-Writer model number
BH16NS40(no OEM units).

- If you have an OEM unit, branded with another manufacturers name,
Please contact that manufacturer for support and firmware updates.

- This firmware update is for use only on PC’s with Windows 10, 8/8.1, 7.

2.Improvement Point

◆ Model : BH16NS40
◆ Version : N1.03
◆ Improvement Point : Improved BD disc compatibility

3.How to update the firmware

1) This is the firmware for SVC Code NS50.
Could please check whehter SVC Code on Main Label is NS50 or not.
If SVC Code of BH16NS40 which you have is not NS50,the firmware is not updated.

2)Download and unzip the file BH16NS40_SVC code NS50.ZIP to a folder of your choice.

3)Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).

4)Check the drive to ensure that there is no disk in the tray before you start
the update procedure.

5)Go into the folder with the update file and double click the BH16NS40_SVC code NS50.exe
program and click the “update” button (red). Once the update is complete,
you will see “Firmware Update Complete” and the button will become green
and advise you to reboot the system. You will need to reboot your PC.

Encuentre software y controladores

¿Aún no se resuelve?