An error occurs if you operate the dryer without installing the lint filter.
If the magnet attached to the inside of the internal filter is not detected, the Filter Error icon flashes (flickers), and operation will stop.
Try this
If an error occurred because the lint filter was not installed
➔ Reassemble the lint filter in the correct position.
The lint filter consists of two filters, the inside filter and the outside filter.
Insert both filters into their correct positions.
If the error persists even after installing the lint filter
➔ Check if the magnet of the inside filter is inserted properly.
The magnet may have fallen out during filter cleaning.
If the magnet fell out, the filter may not be detected.
If the magnet fell out, reinsert it into the correct position.
If the magnet is lost, purchase and fit a new lint filter.
If it is difficult to insert the magnet again because the fixture of the magnet is broken, purchase and fit a new lint filter.
This guide was created for all models, so the images or content may be different from your product.
