Help library: Help library: [LG Dios dishwasher] [for 12 settings] I want to know how to add a rinsing agent.

[LG Dios dishwasher] [for 12 settings] I want to know how to add a rinsing agent.

Troubleshooting Dishwasher 09/05/2023

Facebook Share Twitter Share EMAIL

Do you see that the rinsing agent overflows from the rinse dispenser when you add a rinsing agent to your dishwasher?

Using a dedicated rinsing agent in the dishwasher may ensure leaving no water stains or detergent stains on your dishes.
This also improves the effect of drying and thus reduces the time required for automatic drying after washing.
If, however, the dispenser is stained with rinsing agent, bubbles may be created during the final rinsing.

Checking when to refill the rinsing agent in the dishwasher

Check if the Refill Rinse alarm is flickering on the display of your dishwasher.
This alarm appears when the rinsing agent level is below 30%.
If the rinsing agent level is low, the high temperature dry cycle will be automatically selected.
If the high temperature dry starts even though you did not select it or if the washing takes longer than usual, then refill the rinsing agent.

Flashing conditioner replenishment lamp in display window

Try this

Take care not to spill the rinsing agent when you refill the rinse dispenser.

➔ If the Refill Rinse light is on, open the lid of the rinse dispenser and slowly pour in the rinsing agent.
A fully filled rinse dispenser may last for about a month’s use.

Refilling the rinsing agent in the dishwasher

① Open the lid of the rinse agent container.

② Put the rinsing agent in the plastic container. Slowly add the rinsing agent up to the line marked MAX.
Hasty insertion may create bubbles and overflow.
If the rinsing agent does not go in smoothly, gently push the door of the dishwasher up and down.

③ Wipe off any rinsing agent left around the rinse dispenser inlet using a dry cloth, and then close the lid of the rinse dispenser by pushing it until it clicks into place.

④ Finally, check if the Refill Rinse alarm is cleared from the display.

Open the rinse container and replenish the rinse

Warning!

Use only the recommended dedicated liquid rinsing agent for your dishwasher.
Putting vinegar, citric acid or other materials into the rinse dispenser may cause an abnormality in your dishwasher.

This guide was created for all models, so the images or content may be different from your product.

*Required question

Article Feedback Article Feedback

1. Was this information helpful?*

Please fill out the required field.

YES NO

1-1 Overall, how satisfied were you with the usefulness of this information?*

Please fill out the required field.

1-1-1 How can we improve the information?*

Please fill out the required field.

Difficult to read Instructions were not clear Information does not apply to my product Video would be helpful Broken link(s)

2. How would you improve the information?*

Please fill out the required field.

Characters left : 500 / 500

Submit

Thank you for your feedback!

Help library

[LG Dios dishwasher] [for 12 settings] I want to know how to add a rinsing agent.

Try this

Take care not to spill the rinsing agent when you refill the rinse dispenser.

Contact