Help library: Help library: [LG Air Purifier] [PuriCare 360] How to replace the filter

[LG Air Purifier] [PuriCare 360] How to replace the filter

Troubleshooting Air Purifiers 25/06/2024

Facebook Share Twitter Share EMAIL

Try this.

How to change the filter

1. Hold the top two sides of the cover based on the back of the product and pull it slightly to separate.
The direction with the PuriCare/Objet logo on the product display is the back of the product.

An image of holding the top two sides of the cover based on the back of the product and pulling it slightly to separate

2. Remove the filter by pulling the filter handle.
When replacing the filter, spread newspapers and other things on the floor around you before removing the filter to prevent contamination.

An image of pulling the filter handle to remove the filter

3. After removing the vinyl from the filter, install the filter on the product with the side with the handle facing up.

An image of removing the vinyl from the filter and attaching the filter to the product with the side with the handle facing up

4. Insert the fixed part at the bottom of the cover into the socket at the bottom of the product and close the cover.
※ For the double-tier product, please replace the filter of the lower air purifier in the same way.

An image of inserting the fixed part at the bottom of the cover into the socket at the bottom of the product and closing the cover

How to reset the filter

PuriCare 360

Single-tier product → Press the [Airflow speed + Dust status] buttons for more than 3 seconds.
Upper filter on double-tier product → Press the [Airflow speed + Dust status] buttons for more than 3 seconds.
Bottom filter on double-tier product → Press the [Dust status + Sleep timer] buttons for more than 3 seconds.

PuriCare 360 α

Settings → Filter capacity → Reset filter → Select the replaced filter and press Confirm.
※ The contents that are displayed may differ depending on the product.
For more information, please check the product's manual.

PuriCare 360 Alpha : Settings → Filter capacity → Reset filter → Select the replaced filter and press Confirm

This content was created for common use and may contain different images or information from the purchased product.

*Required question

Article Feedback Article Feedback

1. Was this information helpful?*

Please fill out the required field.

YES NO

1-1 Overall, how satisfied were you with the usefulness of this information?*

Please fill out the required field.

1-1-1 How can we improve the information?*

Please fill out the required field.

Difficult to read Instructions were not clear Information does not apply to my product Video would be helpful Broken link(s)

2. How would you improve the information?*

Please fill out the required field.

Characters left : 500 / 500

Submit

Thank you for your feedback!

Help library

[LG Air Purifier] [PuriCare 360] How to replace the filter

Try this.

How to change the filter

Contact