Try this
Function of remote control button
First, mount the battery from the package in the rear side of the remote control.
(After removing the cover by using the hook at the top of the cover, insert the battery after matching the
polarities( [ + ], [ - ] ).
After that, close the cover again.)
➔ Power button
Press the button to turn on/off the main body. It operates when the main power switch of the main body is turned on or when there is ongoing charging.
➔ Mode button
Press the button to switch cleaning modes. Each time you press it, you can toggle among intense, perfect and zigzag cleaning modes.
➔ Direction button
Press the button to manually adjust the robot vacuum cleaner. The up/down button is used to move the robot vacuum cleaner forward and backward and the left/right button is used to move it left/right.
➔ Start/stop button
Press the button to start/stop cleaning in the cleaning mode selected.
➔ Smart turbo button
Press the button to automatically detect corners, carpets or areas with lots of dusts during cleaning to use the strong suction power for cleaning.
➔ Smart diagnosis button
Press the button to automatically check the current charging status.
Before using the smart diagnosis function, check if the battery is charged and make sure to remove items
within the range of 1 meter in diameter.
Diagnosis results are explained in voice messages and take necessary actions depending on the diagnosis
results.
➔ Language change button
Press the button to change the language for the voice message.
A total of 15 different languages are available for use. You can change language during charging only.
During charging, press the language change button to output the voice message. Within 3 seconds, press the
language change button to toggle among different languages in the order.
➔ Turbo button
Press the button to use stronger suction power than general mode.
When the turbo mode is enabled, the robot vacuum cleaner will make louder noises.
➔ Viewer lock button
Press the button to turn on/off the home view/home guard function for the robot vacuum cleaner.
➔ Repeat button
Press the button to repeat the selected cleaning mode max 5 times until the robot vacuum cleaner automatically returns to the charging station.
➔ Charge button
Press the button to enter charging mode. Start charging by automatically searching for the charging station.
This guide was created for all models, so the images or content may be different from your product.
