Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

[LG refrigerator shelves] I’m curious about how to disassemble and reassemble the shelves.

Troubleshooting

Try this

Disassembling the shelves of top freezer refrigerator models

1. Fully open the door. (If the door is not fully open, the shelves will get caught in the door and cannot be disassembled.)
2. Slightly lift the back of the shelf up and pull it forward.
3. If the shelf is caught in the door, lower and disassemble the shelf.

Slightly lift the back of the shelf and pull forward

Assembling the shelves of top freezer refrigerator models

1. Fully open the door. (If the door is not fully open, the shelves will get caught in the door and cannot be assembled.)

2. For models with shelf hooks at the front left and front right of the shelf, hang the shelf hooks on the shelf support and slide the shelf into place.
For models without shelf hooks at the front left and front right of the shelf, place the shelf over the shelf support and slide the shelf into place.

3. After assembling the shelf, check if it is level.

Image of slightly lifting the back of the shelf and pushing it forward

Disassembling the shelf of the freezer models

1. Fully open the door. (If the door is not fully open, the shelves will get caught in the door and cannot be disassembled.)

2. Slightly lift the front of the shelf up and pull it forward.
There are hooks for the top and bottom shelves, so disassemble the top shelf first.

lifting the freezer shelf forward

Assembling the shelf of the freezer models

1. Fully open the door. (If the door is not fully open, the shelves will get caught in the door and cannot be assembled.)

2. Check the shelf hooks at the left and right sides of the shelf, hang the shelf hooks on the shelf support and push the shelf to the end.
If all top and bottom shelves are removed, be sure to reassemble the bottom shelves first and then reassemble the top shelves.

3. When reassembling the top shelf, align it with the groove on the plastic part of the bottom shelf and push the shelf.

When reassembling the top shelf, align it with the groove on the plastic part of the bottom shelf and push the shelf.

Disassembling the shelf of the freezer models

Remove all drawers except for the top and bottom drawers.
When removing a drawer, pull the drawer out to full extension, lift the front part of the drawer up slightly and remove it with the freezer door open widely.

Pull the drawer to the maximum extension, lift the front of the drawer slightly upwards and pull it out

This guide was created for all models, so the images or content may be different from your product.

*Required question