5.0kW DUALCOOL Deluxe Wall Mounted Air Conditioner Dual Vane

*This function applies to Cooling/Fan mode only. (In Fan mode, only wind speed can be controlled.)

*Wind temperature can be controlled by the remote control or ThinQ.

*The room temperature setting can be controlled through ThinQ only.

*This feature is available when the indoor temperature is below 28℃.

*TUV verified there has been a 70% improvement in thermal comfort(-0.5<PMV<0.5) on the front area of the product during operation in Soft Air mode, compared to the previous model.

*Test Institution: TÜV Rheinland Witness Testing, 

*Test Location: LG residential environmental test facility, 27.0㎡ (area), 64.8㎥ (volume) 

*Test Date: December 2023 

*Test Model: S3-M121L1C0, SW09BAJWAN(SW09AJAU) 

*Test Conditions: Indoor 30±0.3˚C RH 60±5%, Outdoor 30±0.3˚C RH 60±5% 

*Test Method: Measurement of temperature, air velocity, and calculation of thermal comfort in the specified area after 1 hour of operation in Soft Air mode 

 - Measurement Area: 0 to 4.8m distance from the product (1.2m intervals), height 0.6m, 1.1m (seated height) 

 - Calculation of thermal comfort (ISO 7730 PMV equation): Temperature, humidity, air velocity, radiant temperature (measured values), Clothing insulation (0.5clo: summer clothing), metabolic rate (1MET: seated state) used.

*Test Results:

The Soft air mode within the S3-M121L1C0 model has been observed to provide thermal comfort throughout the entire area. (PMV : -0.14~0.28, Draught : 2.6~8.5%)

The Comfort mode in the SW09BAJWAN (SW09AJAU) model has been observed to provide thermal comfort across certain areas. (PMV : -1.73~0.21, Draught : 7.0~33.8%)

 - Thermal comfort level 7 stages, -3: cold, -2: cool, -1: slightly cool, 0: neutral, +1: slightly warm, +2: warm, +3: hot 

 - Thermal comfort range: -0.5 < PMV < +0.5, Draught <10% (Reference standard: ISO7730(2005) Ergonomics of the Thermal Environment) 

*Test Report No. : KR238S9L 001 

*The actual usage environment may differ from the laboratory measurement results.

*Date 2023.06, Measurement results in LG air conditioner test chamber, installation height 1.8m, Fan mode. Using a wind speed probe, the height range from 0.1 to 1.7 m is measured in 0.2 m increments. Measures the maximum distance reached by airflow more than 0.25 m/s speed from the products

Test Model : S3-M121L1C0, Test Result : S1 platform send wind up to 22 m base on test condition.

*The performance result may vary depending on actual usage conditions

*Date 2023.10 LG air conditioner home environment testing chamber, 20.9 ㎡/50.1 ㎥, Jet Mode, Indoor DB (33±0.3)℃/ RH (60±5)%, Outdoor DB (35±0.3)℃/ RH (50±5)% 18℃ setting on cooling mode, Indoor DB (12±0.3)℃/ RH (60±5)%, Outdoor DB (7±0.3)℃/ RH (87±5)% 30℃ setting on heating mode, measuring the time required to drop 5℃ (for cooling)/ rise 5℃ (for heating), from the initial average room temperature.

Test Model : S3-M121L1C0, Test Result : S1 platform send wind up to 22 m base on test condition.

*The performance result may vary depending on actual usage conditions.

Test result : The S1 new platform has up to 23% faster in cooling mode, 6% faster in heating mode then SK previous model base on test condition.

*The performance result may vary depending on actual usage conditions

*The air flow changes automatically based on the operating environment.

*This function can be used through the remote control and ThinQ.

*This function can set the desired temperature only (Humidity is automatically controlled).

*This feature may vary depending on the product and country.

*During the set period, the accumulated electricity is monitored and electricity consumption limiting operations are performed for the remaining period.

*If the daily electricity usage exceeds your set period's target, the remaining electricity usage is recalculated automatically to maintain the target amount.

*This function is only available through the LG ThinQ™ smart application.

*If the total used electricity within the set period exceeds your target amount, kW Manager function is de-selected and the machine will return to a general operation mode. You will be notified of this by the LG ThinQ™ application.

*The initial setting is off when the product is shipped. This function can be set up through ThinQ only.

*The "Window open detection" function is available in Cooling and Heating modes only.

*The default energy-saving mode operating time is 10 minutes and can be set up to 60 minutes through ThinQ.

*LG SmartThinQ is now renamed as LG ThinQ.

*Smart features and voice assistant product may vary by country and model. Check with your local retailer or LG for service availability.

*Google and Google Home are trademarks of Google LLC.

*Amazon, Alexa, Echo and all related logos and motion marks are trademarks of Amazon.com, Inc or its affiliates.

*Voice-enabled smart speaker device is not included.

*Product image is for illustrative purpose only and may differ form actual product.

1) TÜV Rheinland Korea, confirm that the evaporator freeze cleaning mode of LG air conditioners has bacteria reduction performance based on the test results at the proposed test condition. Report No. KR23LGPO, KR2357TB, KR2384CM, KR230RH9, KR237IO2, KR235J9N, KR23OGEG

This test result obtained a test report on and Pseudomonas aeruginosa 99.0% reduction rate from an internationally recognized laboratory, which may vary depending on the actual environment.

Test institution : TÜV Rheinland

Test period : 2023. 04~05 

Test Model : SQ07EDETHN(SE), SQ06BDAWAJ(SA), SQ07SDJBAN(SJ), SQ09MDKWAN(SK)

Test bacteria : Up to 99.0% reduction rate of “Pseudomonas aeruginosa” confirmed

This function can be operated through ThinQ only.

Depending on the environment, Freeze Cleaning mode operation time can be up to 65 minutes.

2) When the product is stooped, the Auto Cleaning+ function operates automatically. During the Auto Cleaning+ mode, the product operates in fan mode for a certain period of time to help remove remaining moisture from the heat exchanger. The Auto Cleaning+ mode is activated at the time of product shipment. Through the ThinQ app, you can set the wind speed and adjust the drying speed. The drying condition/inside the appliance may be different depending on the temperature or humidity of the indoor air.

3) The TÜV Rheinland has verified that the Plasmaster™Ionizer++ removes up to 99.9% of adhering bacteria (Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa) in a test room of 30 m³. The model tested was SW09BAJWAN. The test did not measure the efficiency in removal of bacteria in the air conditioner, and the efficiency in removal of bacteria may differ from actual use conditions. 

4) Intertek has verified that the Plasmaster™Ionizer++ removes up to 99.9% of adhering bacteria (Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa) in a test room of 30 m³. The model tested was SW09BAJWAN. The test did not measure the efficiency in removal of bacteria in the air conditioner, and the efficiency in removal of bacteria may differ from actual use conditions.

5) The BAF-verified Allergy Filter removes allergy-causing substances, such as house dust mites, floating in the air.

[BAF Certification] Certification Authority : BAF, British Allergy Foundation (Allergy UK) Certification Category : For reduction in exposure to house dust mite allergen Triggers : Fungi, house dust mites, mould Licence No : 397 Valid until : 31st December 2024