When using the rear camera lens, the quick menus on the left side of the screen are:
Flash - Sets the flash to
(On),
(Off), or
(Auto). The flash
icon will be displayed on the viewfinder.
Swap camera - Swaps between
the rear camera lens and front camera lens.
Recording mode - Defines how the
video will be recorded. Choose Normal or Live effect. Tap the icon
in the lower-left
corner of the Recording mode screen to view definitions for each of
these modes.
Settings - Opens the video
camera settings menu.
When using the front lens to record video, the quick menus
on the left side of the screen are Swap camera , Recording mode
, and Settings
. There is no flash
setting when using the front camera lens to record video.
The following options are available to optimize your video recording
when you tap the Settings icon on the viewfinder
screen:
Video size : Sets the resolution
(video size) for the video. Choose from FHD 1920x1080 (30fps),
HD 1280x720, QVGA 320x240 (MMS), and QCIF 176x144
(MMS).
The default resolution is FHD 1920x1080 (30fps).
Brightness : Defines and controls
of the amount of light entering the lens. Slide the brightness indicator
along the bar toward “-” for a lower brightness image or toward “+”
for a higher brightness image.
White balance : Defines the ambient
lighting to improve the color qualities of the video under different
lighting conditions. Choose from Auto, Incandescent, Sunny,
Florescent, and Cloudy.
Color effect : Applies artistic
effects to videos. Choose from None, Mono, Sepia, and Negative.
Geotagging : Sets the camcorder
to add location information to the video. This is ideal for geotagging
purposes. Choose Off or On.
Volume key : Set how to use
the Volume Key. Choose Record or Zoom.
Storage : Sets where your
pictures are saved. Choose SD card or Internal storage.
Help : Tap to open the Camera help guide.
Reset : Tap to reset to the default settings.