Registering fingerprints

You can register and save your fingerprint on the device to use fingerprint identification.

On the home screen, tap Settings > Lock screen & security > Fingerprints.

NOTES

This feature is available only when the screen lock is set.
- Lock the device with a Knock Code, Pattern, PIN or Password.
If the screen lock is not set, enable it by following the on-screen instructions. See Setting a Screen Lock for details.

Check the location of the fingerprint sensor at the bottom center of the screen, and lightly place your finger on the sensor.

NOTE	Make sure that the finger fully covers the fingerprint sensor.

Locate the fingerprint sensor on the back of the device and gently put your finger on it to register the fingerprint.

Follow the on-screen instructions.

Place your finger on the sensor and hold it until you feel a vibration.
Move the same finger around on the sensor a little by little until the fingerprint registration is complete.

When the fingerprint registration is done, tap OK.

Tap Add more to register another fingerprint. If you register only one fingerprint and the corresponding finger is not in a good condition, the fingerprint recognition may not work well. As a preventative measure, register multiple fingerprints.