When using the front camera lens, the quick menus on the left side of the screen are:
Swap camera - Swaps between the rear camera
lens and front camera lens.
Shot mode - Defines how the shot will be
taken. Choose from Normal, Beauty shot, Dual camera, and Night.
Settings - Opens the camera settings menu.
The following options are available to optimize your shot when
you tap the Settings icon on the viewfinder screen for
the front camera lens:
Cheese shutter : Activates the camera shutter
by voice command. Choose On or Off.
Brightness : Defines and controls of the
amount of light entering the lens. Slide the brightness indicator
along the bar toward “-” for a lower brightness image or toward “+”
for a higher brightness image.
Image size : Defines the resolution for the
photo. Choose W2M 1920x1080 (16:9), 2M 1600x1200 (4:3), and 1M 1280x960 (4:3).
White balance : Defines the ambient lighting
to improve the color qualities of the photo under different lighting
conditions. Choose from Auto, Incandescent, Sunny, Fluorescent, and Cloudy.
Color effect : Applies artistic effects to
pictures. Choose from None, Mono, Sepia, and Negative.
Timer : Sets a delay timer for the camera. Choose from Off, 3 sec, 5 sec, and 10 sec.
Save as flipped : Sets the camera to save the
image in the orientation it was taken (landscape or portrait). Choose Off or On.
Geotagging : Sets the camera to add location
information to the picture. Choose Off or On.
Shutter sound : Sets the shutter sound for
the camera. Choose from Tone 1, Tone 2, Tone 3, Tone 4, and Off.
Volume key : Set how to use the Volume Key.
Choose from Capture or Zoom.
Help : Tap to open the Camera help guide.
Reset : Tap to reset to the default settings.