When using the rear camera lens, the quick menus on the left side of the screen are:
Flash : Sets the flash to Off, On, or Auto. The flash icon will be displayed on the viewfinder.
Swap camera : Swaps between the rear camera
lens and front camera lens.
Recording mode : Defines how the video will be
recorded. Choose from Normal, Live effect, Dual recording, and Tracking zoom.
When you change these modes, information is displayed to help you use the feature.
Settings : Opens the video camera settings menu.
When using
the front lens to record video, the quick menus on the left side of
the screen are Swap camera , Recording mode
, and Settings
. There is no flash setting
when using the front camera lens to record video.
The following options are available to optimize your video recording
when you tap the Settings icon on the viewfinder screen:
Audio zoom : Allows you to zoom in on an
area to increase the sound sensitivity and decrease the noise. Choose
from On or Off.
Video size : Sets the resolution (video size)
for the video. Choose from FHD60 1920x1080 (60fps), FHD
1920x1080 (30fps), HD 1280x720, QVGA 320x240 (MMS), and QCIF 176x144 (MMS).
The default resolution is FHD 1920x1080 (30fps).
Brightness : Defines and controls of the
amount of light entering the lens. Slide the brightness indicator
along the bar toward “-” for a lower brightness image or toward “+”
for a higher brightness image.
White balance : Defines the ambient lighting
to improve the color qualities of the video under different lighting
conditions. Choose from Auto, Incandescent, Sunny, Florescent, and Cloudy.
Color effect : Applies artistic effects to
videos. Choose from None, Mono, Sepia, and Negative.
Geotagging : Sets the camcorder to add location
information to the video. This is ideal for geotagging purposes. Choose Off or On.
Volume key : Set how to use the Volume Key.
Choose from Record or Zoom.
Help : Tap to open the Camera help guide.
Reset : Tap to reset to the default settings.