This guide shows you how to quickly and easily remove, wash and replace the pre-filter and exhaust filter on your LG CordZero™ Vacuum.
-
Remove pre-filter.
Turn the outer exhaust filter counterclockwise to remove it. Lift out the pre-filter by the handle.
-
Clean the motor.
Use the brush attachment to clean off the motor inside the filter compartment. Do not use water.
-
Clean exhuast filter.
Clean the exhaust filter with a brush or running water. To maintain performance, remove the dust from the filter at least once a month.
NOTE: Allow the exhaust filter to dry, out of direct sunlight, in a well-ventilated place. Reinstalling the filter before it is completely dry may result in mildew or odor.
-
Wash and dry filter.
Clean the pre-filter with a brush and running water. The more often the filters are cleaned, the more optimal the suction power will be.
NOTE: Allow the pre-filter to dry, out of direct sunlight, in a well-ventilated place. Reinstalling the filter before it is completely dry may result in mildew or odor.
-
Reassemble.
Reassemble the pre-filter first. Then align the exhaust filter with the hollow circle at top and turn the filter clockwise until the solid white circles align.
-
Clean dustbin.
Whenever you clean the clean the exhaust filter and pre-filter, it’s a good idea to empty and clean the dustbin and remove and clean the cyclonic mesh filter also. For complete instructions, see the owner’s manual.
NOTE: To avoid odor, allow the cyclonic mesh filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before assembling
Sanmi is a Home Appliance expert and author of this help library article. Please leave him feedback below about the page.
