At a Glance
A non removable/window type air conditioner can be installed by customers themselves.
Try this
1. After placing the product in the installation location, make sure it protrudes toward the indoor side by 4.3in/ 110mm to 7in/180mm.
2. Firmly fix the product to make sure it does not fall toward the outdoor unit side.
To ensure that the condensed water can be smoothly drained toward the backside, make sure that the rear of the air conditioner is tilted downward by about 10 to 15mm (1/2 inch).
Note
When using the level meter, make sure to adjust it to ¼ bubbles.
During product installation, if there is no tilt in the rear, then condensed water can overflow indoors, causing electrical shocks, fire or property damage.
During product installation, if there is no tilt in the rear, then condensed water can overflow indoors, causing electrical shocks, fire or property damage.
3. After fixing the product, block the gap near the wall or the product with insulation material provided in the package.
Move left or right to check the contents.
This guide was created for all models, so the images or content may be different from your product.
