At a Glance
When installing your LG dryer, it is important to properly install your dryer vent to maximize dryer performance and prevent any issues from occurring.
Try This
➜Ductwork Requirements
1The exhaust duct should be as short as possible.
2Verify the exhaust hose is completely straight or in an S curve. (pictured below).
3Ensure the exhaust duct is not kinked, crushed, or dented.
4Avoid using plastic or vinyl ducting.
➜Ventilation System Requirements
The maximum run for the home ventilation should not exceed 65 ft. Deduct 6 ft. (1.8 m) for each additional elbow.
Note
Do not use more than four 90° elbows.
| Wall Cap Type | Number of 90° elbows | Maximum Length of 4-Inch (10.2cm) diameter rigid metal duct |
|---|---|---|
| 0 | 65 ft.(19.8m) | |
| 1 | 55 ft.(16.8m) | |
| 2 | 47 ft(14.3m) | |
| 3 | 36 ft.(11.0m) | |
| 4 | 28 ft.(8.5m) | |
| 0 | 55 ft.(16.8m) | |
| 1 | 47 ft(14.3m) | |
| 2 | 41 ft(12.5m) | |
| 3 | 30 ft.(9.1m) | |
| 4 | 22 ft.(6.7m) |
If you have questions or concerns, please visit our Contact Us page for further assistance.
