When installing the monitor, be careful not to block the air vents of the monitor. If installing the monitor on a table, make sure it is set upright. For wall-mounted installations, ensure a 100mm space between each side of the monitor and the wall. Stands with adjustable height, tilt, swivel, and pivot features can be customized to suit your working environment, enhancing your comfort. After installation, level the screen and use the angle adjustment features for convenient use of the monitor.
Try this
Ensure the monitor can intake external air and expel hot air efficiently by removing any obstacles blocking the air vents.
Verify that the installation environment allows for proper ventilation.
Installing on a Table
Lift the monitor and place it upright on the table.
Ensure there is at least a 100mm(3.94inches) clearance between the monitor and wall for proper ventilation.
Installing on the Wall
Ensure there is a 100mm(3.94inches) space between each side of the monitor and the wall to allow proper ventilation.
For details about installation and usage of the wall-mounting bracket, please refer to the user guide.
Use a hand screwdriver or a coin to assemble the stand.
If you tighten the stand screws by hand, they may not be fully secured, causing the monitor to tilt and wobble.
General Stand
If the screws connecting the monitor and the stand are loose, tighten them.
If the stand base wobbles, use a hand screwdriver or a coin to secure the screws on the bottom.
One-Click Height Adjustable Stand
Reassemble the stand and monitor if there is movement between them.
Insert the stand into the slot from top down and press down to click it into place.
If the base of the stand wobbles, use a hand screwdriver or a coin to secure the screws on the bottom.
Ergo Stand
If the stand installed on the table wobbles, turn the handle underneath to secure it.
Once the stand is fixed in place, if the screen is not level, gently hold the left and right sides of the monitor frame and adjust to level it.
Stands with adjustable height, tilt, swivel, and pivot features can be customized to suit your working environment, enhancing your comfort.
※ Please note that the availability of height and angle adjustment features may vary by product. The method of usage of these features may vary as well. For detailed information, consult your product manual.
Height Adjustment
Adjust the height by holding the sides of the monitor frame with both hands and moving it up or down.
Ensure the monitor attached to the stand is upright. Always use both hands to adjust the monitor.
※ Note that the height adjustment range may vary by product. (General stands do not have height adjustment features.)
Tilt
This feature allows you to tilt the monitor panel forwards or backwards.
It helps you set the correct viewing angle or a position that does not strain your neck.
Ensure the monitor attached to the stand is upright. The monitor can be tilted by -5° to 15°.
Swivel
This feature allows you to rotate the monitor panel left and right.
It is useful when multiple people are viewing the screen or when using multiple monitors side by side.
Ensure the monitor attached to the stand is upright. You can adjust the angle 10° to the left and 10° to the right.
Pivot
This feature allows you to rotate the entire monitor screen 90° vertically, making it convenient for internet browsing, coding, and working with vertical photos.
※ Note that the auto-pivot feature, which automatically rotates the on-screen display, is not supported.
This guide was created for all models, so the images or content may be different from your product.
