Try this
Installing the projector using a tripod
① A projector with a tripod docking part can be installed using a camera tripod.
As shown in the figure, the docking part of the camera tripod can be assembled to the projector instead of a camera.
As shown in the figure, the docking part of the camera tripod can be assembled to the projector instead of a camera.
② It is recommended that, when securing the tripod, you use a bolt with a length of 4.5 mm (0.177 inches) or less, which is the international standard.
The maximum allowable length for the fastening bolt is 5.5 mm (0.216 inches).
Using a bolt longer than the maximum allowable length may cause damage to the projector.
The maximum allowable length for the fastening bolt is 5.5 mm (0.216 inches).
Using a bolt longer than the maximum allowable length may cause damage to the projector.
Warning!
The projector may fall and be damaged if external force is applied while using a tripod.
Avoid installing the projector in an unstable location and use it in a place that can support a weight of 3 kg (6.61 lb) or more.
Spread the legs of the tripod as wide and evenly as possible before installing and securing the projector for safe use.
The location of the tripod docking part may vary slightly depending on the model. Please refer to the product user guide for your model.
Avoid installing the projector in an unstable location and use it in a place that can support a weight of 3 kg (6.61 lb) or more.
Spread the legs of the tripod as wide and evenly as possible before installing and securing the projector for safe use.
The location of the tripod docking part may vary slightly depending on the model. Please refer to the product user guide for your model.
※ Short focal models do not support tripods.
This guide was created for all models, so the images or content may be different from your product.
