If the dust bin is full of dust or the filter is clogged, then the suction power of the robot vacuum cleaner might be reduced.
To maintain the normal suction power of the robot vacuum cleaner, you should clean the dust bin at least twice a month.
Make sure to turn off the main power before cleaning it.
If washed in water, let it completely dry in a shade with good air ventilation for more than 24 hours.
Try this
Separation of the dust bin
On the rear of the dust bin, press the [PUSH] button to open the display window upward.
This way, lift the dust bin upward to separate it from the main body.
Emptying the dust bin
Press the [PUSH] at the bottom of the dust bin to open the dust bin cover and remove dust.
After shaking it off to empty it, use a wet tissue and so on to wipe it off effectively.
Cleaning the dust separator
Grab the end of the dust separator, turn it CCW to separate the dust separator.
Once the dust separator is removed, shake off dusts or use a vacuum cleaner if possible to clean it.
If the suction power of the robot vacuum cleaner is low, and dusts are not removed very well, then wash the dust bin and the dust separator in water.
If washed in water, let it completely dry in a shade with good air ventilation for more than 24 hours.
If used in moisture, it can cause bad odors.
After cleaning, make sure to mount the green filter at the top of the dust bin.
If dust enters the motor inside the robot vacuum cleaner due to a missing filter, the product might malfunction.
Cleaning the dust sensor.
For the optimal performance of the robot vacuum cleaner, use a soft cloth to wipe off the dust sensor.
Once the dust bin is removed, the dust sensor can be found at the inner top of the nozzle on the left.
This guide was created for all models, so the images or content may be different from your product.
