Try This
How to assemble
For more information, please consult the product user manual for your model.
1. Mount the base on the bracket by engaging square bumps on the bracket and fasten it to the integrated stand using the six screws provided.
2. Place a soft cloth or mat on top of a table and put the screen face down on the table.
3. Place the spacer at each hole to which the wall mount fixing screws are to be fastened. Make sure to align the holes with the spacers.
4. Put the integrated stand on the spacers with the holes aligned.
5. If the top of the brackets protrudes above the upper edge of the TV set, reassembly is required.
6. Place the base of the integrated stand as close as possible to the bottom of the TV set and fasten 4 screws, the first 2 in the lower side of the brackets and then the other 2 in the upper side.
7. Stand up the TV stand assembly upright.
Before using the product, be sure to read the product manual and familiarize yourself with the instructions for safety.
Then carefully place the screen face down on the cloth and start assembly.
Loose screws may cause the assembly to tip over during use.
Do not apply excessive force when fastening screws. Doing so can damage the screws or cause the thread to wear out and come out of the groove.
This guide was created for all models, so the images or content may be different from your product.
