[Title]
LG Dishwasher - Adding rinse aid
[Narrator]Adding the rinse aid
Rinse aid icon
This icon illuminates when the rinse aid level is low.
The LED automatically shuts off when the rinse aid is refilled or the level is set to 0.
Open the rinse aid lid by lifting up the flap.
Add a liquid rinse aid to the maximum fill level.
The rinse aid should be settled in the dispenser while filling.
Pour the rinse aid to dispenser, lift the door slightly.
Repeat this step for fill to inside of dispenser.
Avoid overfilling and let the rinse aid settle as to avoid air bubbles.
Wipe off any spilled rinse aid to prevent suds.
Close the lid to lock the dispenser.
Rinse aid is dispensed automatically during the final rinse cycle.
Setting the rinse aid level
Ensure the dishwasher is off.
Press Power and Dual Zone simultaneously to check the current setting.
Press Delay Start to change the rinse aid dispenser setting.
Each press of the button changes the setting from L0 (off), all the way up to L4.
The dispenser has five adjustment levels.
The dishwasher is programmed at the factory for a rinse aid dispenser level of 2(L2).
Rinse aid refill cycle may vary on the rinse aid refill amount and setting level.
Once the desired rinse aid dispenser setting is selected, press Start to Save.
