[Title]
Understanding the SignaLight™ Cycle Indicator Lights - SIGNATURE Dishwasher
[Narrator]On the front of your LG are three signal lights cycle indicator lights
[Red] Error code (left)
[White] Unit is ins use (center)
[Green] Cycle compete (right)
They illuminate when the unit is in use or an error code appears.
The center white signal light.
Turns on during normal dishwasher operation.
When you pause the unit, the center white light blinks.
If the dishwasher is left on pause for longer than 4 minutes, it will turn off automatically.
Be sure to resume the cycle before the unit turns off.
The green signal light on the right.
Turns on when a cycle has successfully finished and your dishes are clean.
The green signal indicator light will stay on for 90 seconds
To keep the green Signal light cycle indicator light on until the door is opened, turn the power on, then press and hold high temp for 3 seconds until ON appears on the display.
The dishwasher retains the setting until you manually change it.
If the door is not closed within 4 seconds of pressing the start button, the sensor signal light cycle indicator light flashes, an alert will sound, and the dishwasher will not operate.
To start the dish washer properly, press start and close the door within 4 seconds or close the door and then press start.
If the red signal light cycle indicator on the left
Turns on, the dishwasher is showing an error code.
For more information see the list of error codes in the trouble shooting section of the owner’s manual.
If none of the signal light cycle indicators light turn on during operation make sure the power supply to the unit is connected and working properly.
[Logo] LG: Life's Good
