Try this
By pressing the [Wind Angle Control] button on the wireless remote controller, you can adjust the wind angle.
Water supply outlet selection
➔ Press the button. Then [1] water supply outlet and the up/down wind icon will start blinking.
Each time you press the button, the order of water supply outlet is shifted.
※ Order of water supply outlet
[1] water supply outlet → [2] water supply outlet → [3] water supply outlet → [4] water supply outlet → mode
cancellation
Angle selection
➔ Press the [Temperature Control] button to select an angle.
By pressing the vane angle control button for about 3 seconds, you can set it to [Standard Angle].
Press the Set/Cancel button to save the setting and cancel the wind angle mode.
After the pre heating/defrosting is completed, it will once again operate at the angle that was set.
Vane angle control function is an additional function and some products do not support it.
This guide was created for all models, so the images or content may be different from your product.
