Find helpful information about your LG Product through our Help Library. Find helpful information about your LG Product through our Help Library.

Help Library

Find helpful information about your LG product

LG washing machine- Are you curious about the Delay End and Storage function?

Troubleshooting


Try This

How to set Delay End

1. Put your laundry and detergent or fabric softener in the washing machine, and then close the door.
2. Press the Settings button on the control panel.
3. Use the arrow button to move to Delay End, and then press OK.
4. Select the time that you want using the arrow button, and then press OK.
5. Press the Prev button to return to the Cycle screen and press Start.
6. Then the machine starts, closes the door, weighs your laundry, and displays the time that you have set.

Images of how to set delay end

Storage function

If you don't plan on taking the clothes out of the Styler immediately the cycle is completed, use the Storage function to keep them dry.

How to use the Storage function

Press the Cycle button to select the cycle you want, then press the Sterilize button for 3 seconds to set the Storage function.
Depending on the product, the button to select the Storage function may vary. The Storage function cannot be used for the Indoor Dehumidification cycle.

How to cancel Storage
To cancel Storage, press a button to select a different cycle, then press the Sterilize button for 3 seconds.
The Storage function is operated automatically after completing the selected cycle and operates for up to 24 hours.
The Storage function performs a drying cycle that heats the air every 45 minutes to keep the clothes dry, so periodic operation noise will be evident.
Rest assured as it is not a product defect. 3. Use the arrow button to move to Delay End, and then press OK.



Note
The time you have set in Delay End means the time remaining for the laundry to be finished.
If you change to another cycle after you have set Delay End, you will have to set it again.

   This guide was created for all models, so the images or content may be different from your product.

*Required question