Various installation methods exist by dishwasher type and kitchen design and layout.
Consult this guide to find the most suitable installation method for your dishwasher.
One key factor that influences the installation method is the cabinet baseboard, also known as the toe kick.
The plate is made from the same material as the kitchen cabinet, providing a seamless look to the furniture. A convertible dishwasher (which offers the possibility of freestanding or built-in installation) can be installed irrespective of the height of the cabinet baseboard.
However, it may be necessary to remove the baseboard.
When adjusting the height of the dishwasher for installation (up to 60mm for built-in only models, up to 30mm for convertible models), the allowed height of the baseboard changes according to the adjusted product height.
Installation of a built-in only model
- Wide baseboard (150mm)
If the height of the baseboard exceeds 120mm, installation of the built-in dishwasher for the wide baseboard is recommended.
One key factor that influences the installation method is the cabinet baseboard, also known as the toe kick.
The plate is made from the same material as the kitchen cabinet, providing a seamless look to the furniture.
A convertible dishwasher (which offers the possibility of freestanding or built-in installation) can be installed irrespective of the height of the cabinet baseboard.
However, it may be necessary to remove the baseboard.
When adjusting the height of the dishwasher for installation (up to 60mm for built-in only models, up to 30mm for convertible models), the allowed height of the baseboard changes according to the adjusted product height.
Installation of a built-in only model
- Narrow baseboard (100mm)
If the height of the baseboard is less than 120mm, installation of the built-in dishwasher for the narrow baseboard is recommended.
※ If the baseboard of the sink cabinet is 120mm, the legs of the unit are adjusted 20mm higher. Thus, the minimum required height of the cabinet becomes 835mm.
One key factor that influences the installation method is the cabinet baseboard, also known as the toe kick.
The plate is made from the same material as the kitchen cabinet, providing a seamless look to the furniture.
A convertible dishwasher (which offers the possibility of freestanding or built-in installation) can be installed irrespective of the height of the cabinet baseboard.
However, it may be necessary to remove the baseboard.
When adjusting the height of the dishwasher for installation (up to 60mm for built-in only models, up to 30mm for convertible models), the allowed height of the baseboard changes according to the adjusted product height.
※ If the baseboard of the sink cabinet is 120mm, the legs of the unit are adjusted 20mm higher. Thus, the minimum required height of the cabinet becomes 835mm.
Wait! Find out more.
The following are important points to note regarding the dimensions of the installation space.
| Depth of the cabinet (mm) | Points to note |
|---|---|
| Greater than 600mm | Standard depth, also the recommended depth, for installation. |
| 567~600mm | Installation is possible but install with care to avoid compressing the drain hose/water supply hose. |
| 532~567mm | Check beforehand as it may result in protrusion of the unit front. |
Move left or right to check the contents.
| Width of the cabinet (mm) | Points to note |
|---|---|
| Less than 589mm | Installation is not possible. (The width is smaller than the size of the unit.) |
| 598~600mm |
Installation is possible with care. If force is used due to lack of space, physical damage to the exterior may be caused. |
| 600~605mm | Installation is possible. |
| Greater than 605mm | Installation is not possible. (A gap could be seen on the exterior.) |
Move left or right to check the contents.
| Height of the cabinet (mm) | Points to note |
|---|---|
| 850~880mm |
Up to 880mm in height is possible if a top plate is included. This measure includes the top plate and leg adjustment. (Built-in only models are excluded.) |
| 820~850mm |
Up to 850mm in height is possible if a top plate is NOT included. This measure includes leg adjustment. |
| 815~820mm | Installation is possible. |
Move left or right to check the contents.
*Top plate: The plate at the very top of the unit.
It can be attached or detached depending on the height of the cabinet.
*Leg : The unit is equipped with screw-type legs at its base, which are utilized to adjust the unit's height.
※ Caution: Install the unit in such a way that the rear of the unit is not exposed.
Fingers may get trapped behind the unit and injuries may be caused.
This guide was created for all models, so the images or content may be different from your product.
