LG CordZero A9 - How to Install the Charging Station

Installing Charging Station

If you want to install the floor standing station, take out the charging station, the charging station support and the extension pipe from the product and accessories box,

First, find a place to install the charging station,

Choose a flat floor with an outlet nearby.

Place the charging station in the installation area and attach the extension pipe! It's properly attached if you heard a 'click' sound.

Be careful not to get your fingers stuck in the gaps while assembling.

Attach the charging station to the connected charging station pipe. It is properly attached if you heard a 'click' sound.

Be careful not to get your fingers stuck in the gaps while assembling.

Connect the adapter to the back of the charging station, and then organize the power cord into the power cord anchoring ring.

Plug the power plug into the outlet.

If you want to fix the charging station using screw anchors, prepare the wall-anchoring block, 1 wall anchor, and 1 stand screw set for the stand to fix the charging station.

Use wall-anchoring screws for the charging station only on concrete or solid walls.

Drill a hole on the wall to fix the charging station.

The recommended diameter of hole is ⌀ 6.5 and the recommended depth is 100 mm.

Insert 1 screw anchor into the hole.

Align the wall anchoring block with the back of the charging station and push the charging station against the wall.

Hold the charging station by hand, and assemble it by tightening the screw anchor for the charging station support completely.

If you want to fix the charging station without using screw anchors, prepare 2wall-anchoring blocks and 2 double-sided tapes to anchor the charging station.

Do not use the double-sided tape on wallpaper. The weight of the charging station and the product could damage the paper.

First, peel only the outer donut shape of one double-sided tape. After checking the front / back shape of the wall-anchoring block, attach one peeled double-sided tape on the front of the wall-anchoring block.

Peel one side of the double-sided tape and stick it on the back of the charging station, aligning it with the wall anchoring block.

Peel the remaining double-sided tape.

Attach the peeled off double-sided tape to the back of the wall-anchoring block to the back of the charging station.

After peeling the double-sided tape, press the charging station against the wall to anchor it.

When Installing the wall-mount charging station, take out the charging station and the adapter from the product accessories box,

For installation, look for a place with a socket nearby. It is recommended to install the charging station 1m above the floor.

Make sure to connect the adaptor at the back of the charging support and plug in the power cord.

After mounting the charging-station to the wall the adapter cannot be connected or disconnected. Drill two holes on the wall to fix the charging station. The recommended diameter of hole is ⌀ 6.5 and the recommended depth is 100 mm. Insert 2 drill anchors in the drilled hole.

After fixing the screw anchors and the charging station to the wall, assemble them by tightening the two wall-anchoring screws,

Be careful not to step on the power cord of the adapter. The adapter may get removed from the product.

If you want to use it as a wall-mount after installing the standing charging station, step on the charging station support and pull the charging station up.

The charging station pipe and the charging station can not be detached once they're assembled.

After installing the charging station, insert the battery or the product body to check if the charging indicator light comes on.

If the body us attached correctly, a beep sound will be heard.

If the alarm sound is not heard, remove the vacuum cleaner and insert it again.