Help Library

Topic

  • general article icon
    Troubleshooting
    [LG Front Load Washer] How to unlock the door
    The temperature inside the drum is high. ... The drum is filled with water or is spinning. ... Wait! Find out more. ... The door of the front load washer is locked while washing or spin-drying is taking place. ... This is to prevent inju...
  • general article icon
    Troubleshooting
    [LG Styler dehumidification] I want to know how to use the Dehumidify cycle
    I want to know how to use the [Dehumidify] cycle. ... If you select [Dehumidify], it dehumidifies the room where the Styler is installed. ... 3. Once [Dehumidify] is selected, the time is set to 2 hours. ... If you press the button once ...
  • general article icon
    Troubleshooting
    LG Washer - Troubleshooting Washer Door Not Opening After Using Remote Start
    Overview ... This solution addresses the issue where the door does not open after the laundry cycle is completed when using remote control (Remote Start). ... As shown in the image below, if you enable the "Keep remote start ON" option i...
  • general article icon
    Troubleshooting
    LG Washer - Circuit Breaker is Tripped
    Power supply to the washer could get interrupted due to the insufficient capacity of the socket where the washer is plugged. ... It is more likely for the circuit breaker to trip if the power cord is plugged into a power strip instead of...
  • general article icon
    Repair
    LG Frontload Washer - Troubleshooting Steam Coming from Washer
    1. If the door is opened during a wash cycle, it is normal to see steam escape. ... When running on Normal cycle, the temperature of the water is raised up to 40°C/104°F and the temperature of the air inside the drum also rises. ... * A ...
  • general article icon
    Repair
    LG Frontload Washer - Troubleshooting a tS(t5) Error Code
    A tS error may occur if the turbidity sensor has a connection problem or if the sensor is faulty. ... Especially in winter when washers can freeze, a sensing issue of the turbidity sensor may be caused and a tS error may occur. ... Try this
See more